[Product 1]Accurate and Quick Stud Finder - The ENGiNDOT stud finder can detect 4 materials include wood, ferrous metals, non-ferrous metals, and AC wires. This wall scanner has 2 wood scan modes with the upgraded smart chip that can precisely locate the center and edge of the wood stud. The exact wood scan is up to 0.75 in.(20mm) deep, the deep wood scan can through 2 layers of drywall up to1.5 in.(38mm) thick.
[Product 1]Wire Warning & Metal Detection up to 100MM - Electrical wire detection is up to 2 in.(50mm) depth. No matter what detection mode it is in, AC live wire scan always working on. The ferrous metal scan is up to 3.15 in.(80mm) deep, the non-ferrous metal scan is up to 4 in.(100mm) deeper than normal, so you won’t worry about drilling or hammering into a live wire, metal pipes, and cables.
[Product 1]Automatic Calibration & 3 Signal Lights- Saving your effort the stud scanner calibrates automatically without pressing the button manually all the time. Signal Lights show green when the detector calibration is ready and changes from yellow to red as you approach the center of the detected object. Easy to read and use with a large LCD screen.
[Product 2]DUAL RANGE: The multimeter accurately detects standard and low voltage (12-1000V AC / 48-1000V AC), which is more sensitive and flexible. Low sensitivity can probe power supply lines such as power boards, desk lamps, computers, etc., and high sensitivity can detect buried walls and other internal wiring detection (depth≤1.18 inches). The electronic pen can beep from low, medium, and high frequency to indicate voltage.
[Product 2]SAFETY FIRST: The voltage tester pen detects voltage in a non-contact way, and insulation operation can ensure the safety of testers. Moreover, the NCV probe will automatically recognize the voltage and display it on the graph. Safety Compliance: CAT.III 1000V CAT.IV 600V; CE, FCC.